Posted by: admin in Business,General,Home Office,Office,Office Improvement,Services on December 11th, 2014


My GE room AC has begun to act up. It will run for 5-7 mins and then quit. The fan will come back on after 30 seconds but the compressor won’t. When the compressor tries to kick in again it grinds down to a halt. It’s drawing a lot of current as the TV will brown out. So I checked my thermostat to see if maybe there is some cold air blowing on or near it causing it to prematurely shut down. As soon as it warms back up though it tries to turn the compressor back on. The refridgerant though has not had enough time to bleed through the system in 30 seconds, so the compressor is trying to start against a heavy load.
It infact is stalled so the built in thermal protection turns it off. It eventually clicks back on and repeats until it gets going. This is normal activity when the compressor is “short cycled”, but its not particularly good for it, so I did not run my unit until it gets fixed. The compressor does not have enough it is shutting down the unit too soon and back on right away.

I also checked if the condenser clean and if the condenser fan running at full blast. I do not have too much on the line so it could not be the compressor is overheating and kicking out on thermal overload. The unit is directly connected to a 110VAC voltage outlet.

I tried calling around to get quotes to me general idea of what I am facing. I might may be better off with little mom and pop shops compared to national chains. Sometimes they will give you a better deal that a chain won’t.

I had someone come out and take a look at it, and he said the capacitor went bad, so we had it replaced. The cool air started flowing again, and we enjoyed cool AC for about a month, then the AC again stopped working. The same guy took a look at AC unit and he said this time the problem was a bad compressor. He said it is still under warranty but that labor to replace the compressor would be well over $1000.

I went to other repair guys to take  look at the unit to and for a quote of the cost of repair on the unit.  Based on all the feedback, it sounds like the clear thing NOT to do is to just get a new AC unit, but probably trying to get the current AC fixed (compressor replacement) and wait for the old furnace to fail before changing the entire system as a matched set – new furnace and new AC unit.

$700 does seem kind of high for compressor replacement labor (considering the part would be replaced under manufacturer’s warranty), and the cost of installing a new AC unit seems kind of low by comparison since the Goodman the AC guy quoted is probably costing them $1350 wholesale… so $1500 total would mean labor is $150.

I don’t get these AC repair guys.. the first guy said around $1200-1400 to replace the compressor under warranty, the second guy is saying $700, which is better but still does seem high.. if in fact the same type of work goes into installing a new unit, you’d think the labor would be $150 or in that ballpark.

A friend told me that in his area, it costs at a bare minimum, $60 to get someone just to come out on a service call, and if the unit is not worth repairing, the repair cost will be put toward a new unit, which, according to what I’ve been told, would cool better using less energy than the old one. Air conditioning units are really heavy, so taking one in to a shop for service would be a lot of work. Then, the shop would most likely charge you about the same as a service call to diagnose the problem. I don’t like the idea of throwing something away and buying new, but maybe this is one of the times when that is the most practical decision.

So I tried looking around and searched online for other ac repair Phoenix  to find out who can give me the lowest price to repair my unit. The guys that gave me the lowest repair cost are from Cool Touch and they also have promos. They have vastly experienced technicians to assure the best satisfaction. These  also solved my problem at an affordable price. Extensive testing procedures and quality control methods employed by them will guarantee a perfect service.

sb10062782e-001